HL-75 Air Heater Diversion Load
The HL-100 and HL-75 air heating resistive loads enclosed in vented aluminum boxes can be used in 12,24 and 48 volt diversion regulation systems. The aluminum box may get very hot in operation. It should be mounted at least 12" from any flammable material.
HL-100 is shipped as a 4-ohm resistor and can be reconfigured as a 1, 0.5, or 0.25 ohm resistor by easily changing connections in the terminal block.
HL-75 is shipped as 3-ohm resistor and can be reconfigured as a 0.75-ohm seistor by changing connections in the terminal block. See chart below for diverted amps at various voltages
Warranty: 2 years
Also Known As:
|Model Number||Resistance Setting||Diversion Load Amps Voltage Below|