General Electric GEPV-110-M 110 Watt Solar Module 12V
[GEPV-110-M, GEPV.110.M, GEPV 110 M, GEPV_110_M, GEPV110M]

General Electric GEPV-110-M 110 Watt Solar Module 12V

General Electric GEPV-110-M 110 Watt Solar Panel

GE Energy's technologically advanced solar electric power products offer high quality and customer value. They are all based on crystalline silicon, the material of choice for efficiency and reliability for more than 25 years. Our single-crystal solar cells are among the most efficient commercially available today. We offer a full line of photovoltaic (PV) cells, solar modules which utilize a series of cells wired together and complete packages for residential, commercial and industrial systems.

Designed for optimum use in residential, commercial and battery charging applications, the GEPV-110-M solar module contains 36 single-crystal cells connected in series, and generates a peak power of 110 watts at 16.7 volts.



Features & Benefits

• Exacting tolerances of "5 percent ensure the module satisfies maximum rated power output


• Robust and lightweight anodized aluminum frame with pre-drilled holes for quick installation


• Engineered for the most rugged environments including hail, snow and ice storms


• Supplied with industry standard multi-contact connectors

Typical Performance Characteristics
Peak Power (Wp): Watts 110
Maximum Power Voltage (Vmp): Volts 16.7
Maximum Power Current (Imp): Amps 6.6
Open Circuit Voltage (Voc): Volts 21.2
Short Circuit Current (Isc): Amps 7.4
Short Circuit Temperature Coefficient: mA/"C +3
Open Circuit Voltage Coefficient: V/"C -0.08
Maximum Power Temperature Coefficient: %/"C -0.5
Maximum Series Fuse: Amps 15

Length: 58.1 inches (1,477 mm)
Width: 26.0 inches (661 mm)
Depth of Frame: 1.4 inches (35 mm)
Depth Including J-box: 2.2 inches (55 mm)
Connector Length (when applicable): 15.0 inches (381 mm)
Weight: 26.1 pounds (11.9 kg)

Mounting Hole Locations
Center Spacing: 25.3 inches (643 mm)
Edge Distance: 16.4 inches (417 mm)
Width Spacing: 24.3 inches (616 mm)
Mounting Hole Diameter: 0.26 inches (6.7 mm)

Physical Design Properties
Weight (Wind) Bearing Potential: 50 lb/ft (125 mph equivalent)
Hailstone Impact Resistance: 1 inch at 50 mph (25 mm at 80 kph)

Also Known As:
GEPV.110.M
GEPV 110 M
GEPV_110_M
GEPV110M