Enphase Energy ET17-208-30
Enphase Energy ET17-208-30 208VAC Trunk Cable Landscape Orientation with Install Kit and Cable Clips - 30 drops

ET17-208-30 208VAC Trunk Cable for Landscape Module Orientation with Install Kit and Cable Clips - 30 drops

Enphase Energy ET17-208-30 208VAC Trunk Cable Landscape Orientation with Install Kit and Cable Clips - 30 drops

The Engage Cable is a continuous length of 12AWG cable with pre-installed connectors for Enphase Microinverters to plug into. The cable is handled like standard outdoor-rated electrical wire, allowing it to be cut, spliced and extended as needed. Engage cabling is available in two different voltage ratings (208VAC or 240VAC) and can be purchased with connectors spaced ideally for installations either in portrait (40") or landscape (67") orientation.

Features of the Enphase Energy ET17-208-30 208VAC Trunk Cable Landscape Orientation with Install Kit and Cable Clips - 30 drops:

• Quick installation
• Large branch capacity
• Simple design; no additional cables; reduced fire risk
• Cable temperature rating: 90°C (194°F) wet/dry
• Cable insulator rating: THWN-2
• UV exposure rating: UL 746 C, F1
• Conductor gauge: 12AWG

Also Known As:
ET17.208.30
ET17 208 30
ET17_208_30
ET1720830

Specifications for the Enphase Energy ET17-208-30 208VAC Trunk Cable Landscape Orientation with Install Kit and Cable Clips - 30 drops

Required and Recommended Products for the Enphase Energy ET17-208-30 208VAC Trunk Cable Landscape Orientation with Install Kit and Cable Clips - 30 drops

Recommended Product(s):

Enphase Energy ET-SPLK-05 Cable Splice Kit Enphase Energy ET-TERM-10 Branch Terminator Wiley Electronics ACC-R2 Acme Cable Clip-R2 Enphase Energy ET-DISC-05 Cable Disconnect Tool Enphase Energy ET-SEAL-10 Water Tight Sealing Caps