Enphase Energy ET10-240 240VAC Trunk Cable Portrait Orientation with Install Kit - 12 Drop

Description
Recommended

Enphase Energy ET10-240 240VAC Trunk Cable Portrait Orientation with Install Kit - 12 Drop

ET10-240 240VAC Trunk Cable Portrait Orientation with Install Kit - 12 Drop

The Engage Cable is a continuous length of 12AWG cable with pre-installed connectors for Enphase Microinverters to plug into. The cable is handled like standard outdoor-rated electrical wire, allowing it to be cut, spliced and extended as needed. Engage cabling is available in two different voltage ratings (208VAC or 240VAC) and can be purchased with connectors spaced ideally for installations either in portrait (40") or landscape (67") orientation.

Features of the Enphase Energy ET10-240 240VAC Trunk Cable Portrait Orientation with Install Kit - 12 Drop:

Quick installation
Large branch capacity
Simple design; no additional cables; reduced fire risk
Includes Install Kits: 1 Branch Terminator, 1 Cable Disconnect Tool, 1 Sealing Cap and Tool, and 30 wire clips
Cable temperature rating: 90°C (194°F) wet/dry
Cable insulator rating: THWN-2
UV exposure rating: UL 746 C, F1
Conductor gauge: 12AWG

Also Known As:
ET10.240.12
ET10 240 12
ET10_240_12
ET1024012

Recommended Products for the Enphase Energy ET10-240 240VAC Trunk Cable Portrait Orientation with Install Kit - 12 Drop

Enphase Energy ET-DISC-05 Cable Disconnect Tool - 5 Pack

Discontinued

Enphase Energy ET-SEAL-10 Water Tight Sealing Caps

Discontinued

Enphase Energy ET-SPLK-01 Cable Splice Kit

Discontinued

Note: Specifications and pricing of the Enphase Energy ET10-240 240VAC Trunk Cable Portrait Orientation with Install Kit - 12 Drop subject to change without notice. Illustrations and descriptions of the Enphase Energy ET10-240-12 do not claim to be complete or exhaustive.