1.5" Add-A-Row Kit 12043-1 Used when more than one row of collectors is to be installed. Use one (1) kit for…
- Manufacturer
- Elm Distribution
- Model
- 12043-1
1.5" Row Spacer Kit 12017-1 used when a row of collectors must be interrupted by a space to allow for obstructions…
- Manufacturer
- Elm Distribution
- Model
- 12017-1
1.5" System Kit 12135-1 Contains additional hold-down hardware, connection parts and adapters needed to complete water connections from the collectors to…
- Manufacturer
- Elm Distribution
- Model
- 12135-1
2" Add-A-Row Kit 12043-2 Used when more than one row of collectors is to be installed. Use one (1) kit for each…
- Manufacturer
- Elm Distribution
- Model
- 12043-2
2" Hurricane Strap 12035-2 Hurricane strap 2" header…
- Manufacturer
- Elm Distribution
- Model
- 12035-2
2" Row Spacer Kit 12017-2 used when a row of collectors must be interrupted by a space to allow for obstructions…
- Manufacturer
- Elm Distribution
- Model
- 12017-2
2" X 7" System Connector Hose 60649-2 High pressure reinforced system connector hose. Can also be used to connect solar collectors around…
- Manufacturer
- Elm Distribution
- Model
- 60649-2
Double Hole Bracket 50069 May be used on steep roof applications or in high wind areas where extra hold-down strength is…
- Manufacturer
- Elm Distribution
- Model
- 50069
Strap Bracket 50006 Stainless steel butterfly strap hold down bracket.…
- Manufacturer
- Elm Distribution
- Model
- 50006
1.5" Vacuum Relief Valve 10003-1 1.5 inch end cap style vacuum relief valve. For use on ground mounted systems or one story…
- Manufacturer
- Elm Distribution
- Model
- 10003-1
1.5" Vacuum Relief Valve 10003-1 1.5 inch end cap style vacuum relief valve. For use on ground mounted systems or one story…
- Manufacturer
- Elm Distribution
- Model
- 10003-1
107 ft Roll Hold Down Strap 10035-2 Hold-Down Strap is required to secure collectors to the counting surface. Model 10035-2 (107') can…
- Manufacturer
- Elm Distribution
- Model
- 10035-2
Displaying 1 to 12 (of 16 products)