Concorde PVX-3050T
Concorde PVX-3050T Sun Xtender Deep Cycle Solar Battery 6V 305Ah

Concorde PVX-3050T Sun Xtender Deep Cycle Solar Battery 6V 305Ah

Concorde PVX-3050T Sun Xtender Deep Cycle Solar Battery 6V 305Ah

VRLA-AGM Deep Cycle Battery for Off Grid and Grid Tied Systems. Sun Xtender batteries provide safe, reliable and long lasting power.

Environmentally friendly, there is no exposed lead on Sun Xtender batteries.

100 percent recyclable.

Sustainable, Clean, Renewable Energy Storage.

Since 1987, Sun Xtender solar batteries have been hand crafted for quality in the U.S.A. Valve regulated lead acid batteries with AGM construction (VRLA-AGM) is the original AGM design adopted by the military. Non-spillable construction prohibits any electrolyte leaking or spewing, allowing the battery to be used upright or on its end or side. The maintenance free AGM design means no water replenishment - ever.

Utilizing pure lead calcium grids, the Sun Xtender battery plates are thicker than the industry standard for longer cycle life, increased reliability and power. The low impedance AGM design allows for excellent charge acceptance and there is no current limit required with controlled voltage charging.

The Sun Xtender Battery product line features proprietary PolyGuard Microporous Polyethylene Separators, shielding the positive plates against shorting, shock or vibration. No other manufacturers offer this dual layer insulation protection feature.

Sun Xtender Battery covers and containers are uniquely molded with high impact, reinforced copolymer polypropylene and are designed with thick end walls to prevent bulging. The copper alloy T Terminals are corrosion resistant and are supplied with silicon bronze bolts and washers.

All Sun Xtender Batteries ship Hazmat Exempt.

Standard Terminals: All batteries with a "T" at the end of the part number incorporate M8 (copper alloy) threaded insert terminals except as follows: PVX-340T & PVX-420T are M6 and PVX-2120L & PVX-2580L are "L" Blade (solid copper) terminals. All batteries are supplied with silicon bronze bolts, nuts, and washers required for installation.

Optional (Copper Alloy) Terminal Installed at the Factory: Batteries with a "T" at the end of the part number (except PVX-340T & PVX-420T) are available with an optional factory installed "A" SAE automotive type terminal by adding the appropriate suffix to the end of the part number. For example, order PVX-1040TA instead of PVX-1040T.

Optional (Copper Alloy) Terminal Kit: Kits can be ordered for `After Factory` customer conversions of "T" type batteries (except PVX-340T & PVX-420T) by ordering P/N 6918 for the "A" SAE automotive post kit. Kit includes terminals and installation bolts required for installation.

Terminal Torque Values: [M6 use 35 in-lbs / 4.0 Nm] [M8 use 70 in-lbs / 7.9 Nm]

Handles: All batteries include built in lifting handles except the PVX-490T and PVX-560T.

Ratings: Capacity ratings are after 15 cycles and are stated at 77°F (25°C) to 1.75 volts per cell.

SUN-XTENDER Battery Design Features

• Copper Alloy Terminals for improved electrical connections.
• No exposed lead terminals. This change was incorporated to improve environmental safety and health.
• Threaded insert terminals are recessed to prevent short circuits across battery connections.¹
• New cover is flat top design. No protruding or exposed vent valves.¹
• Built in lifting handles, except PVX-490T and PVX-560T.
• Sealed AGM Deep Cycle Battery 6V 305Ah
• Reinforced container walls to reduce bulging.
• High Impact Strength Copolymer Polypropylene Case and Cover.
• Completely Sealed Valve Regulated Construction.
• Immobilized Electrolyte Non-Spillable.
• Maintenance Free Design Never Requires Watering.
• Absorbed Glass Mat (AGM) Micro-porous Glass Separators retain electrolyte.
• Flame Arresting Pressure Regulated Safety Valves.
• UL Recognized Systems Component.
• Positive Plates - Proprietary Lead Calcium Alloy- Negatives Plates - Lead Calcium.
• Low Self Discharge Rate Approximately 1 % per month at 25°C (77°F).
• Operate over a Wide Range of Temperatures from -40°C (-40°F) to +72°C (+160°F).
• Classified as "Non-Spillable Battery" for transport. Complies with DOT HMR49, Non-Hazardous Materials.

¹ Threaded Insert "T" type Features. Ratings: Capacity ratings are after 15 cycles and are at 77°F (25°C) to 1.75 volts per cell.

Charging Instructions: Initial charge or recharge - 2.37 to 2.40 volts per cell at 25° C (77° F). Float charge - 2.20 to 2.23 volts per cell at 25° C (77° F). Conditioning charge - 2.58 volts per cell at 25° C (77° F). Temperature compensation - 4.00 mV. per cell per degree C [Reference to 25° C (77° F)]. This is for battery temperature (not ambient temperature) and is useful for battery temperatures from 0° C to 40° C. Contact Concorde Battery Corporation for temperatures that exceed this range.

Also Known As:
PVX.3050T
PVX 3050T
PVX_3050T
PVX3050T

Specifications for the Concorde PVX-3050T Sun Xtender Deep Cycle Solar Battery 6V 305Ah

PVX-3050T Specification