5250W Solar Grid Tie System - 30 Sharp 175W, IG5100 Fronius Inverter
Image shows general items and are not an exact representation of items in the system

The 5250W Solar Grid Tie System - 30 Sharp 175W, IG5100 Fronius Inverter is no longer available from Infinigi.

Regrettably, we do not have any inventory left nor have access to this product as it is discontinued. Please note that we place this message on products that we have exhausted our options in obtaining. Contacting us will only reaffirm this message.

Thank you,
Infinigi Staff

5250W Solar Grid Tie System - 30 Sharp 175W, IG5100 Fronius Inverter

The Sharp 5250W Residential Solar Grid-Tie Systems (SGTS) provide reliable power for your home or business using top quality UL listed products. Each grid tie system is pre-packaged to save design time and includes solar modules, inverters, cables and all necessary hardware and electrical components. The Sharp 5250W residential / business solar grid-tie system is modular which means you can combine multiple units together or add to your system in the future.

The Sharp 5250W solar grid-tie system meet NEC code requirements and US safety standards. Complete installation guide and operational manual included.

Features of the 5250W Solar Grid Tie System - 30 Sharp 175W, IG5100 Fronius Inverter:

  • Solar Modules: 30 x 175W Sharp Modules. Solar modules are supplied equipped with "MC" or Tyco type interconnects.
  • Outdoor-rated Grid-Tie Inverter: IG5100 Fronius Inverter
  • Wiring:  Includes #10 AWG MC or TYCO interconnect extension sub-array cords, wire management system with cable ties andwire clips, PV copper groundinglug system, PV fused combiner (if needed) and array wiring pull boxes. The home-run wiring from the solar array to the main panel is supplied by the installer.
  • Documentation: Includes electrical drawings, data sheets, warranties, installation instructions and owner's manual.

Also Known As:
SHA 5250 IG5100

Specification for Sharp 175W Module:
Electrical CharacteristicsSharp NT-175UC1
Maximum Power (Pmax)* 175 W
Tolerance of Pmax +10%/-5%
Type of Cell Monocrystalline silicon
Cell Confi guration 72 in series
Open Circuit Voltage (Voc) 44.4 V
Maximum Power Voltage (Vpm) 35.4 V
Short Circuit Current (Isc)   5.40 A
Maximum Power Current (Ipm)   4.95A
Module Efficiency (%) 13.45 %
Maximum System (DC) Voltage 600 V
Series Fuse Rating 10 A
NOCT 47.5°C
Temperature Coefficient (Pmax) -0.485%/°C
Temperature Coefficient (Voc) -0.36%/°C
Temperature Coefficient (lsc) 0.053%/°C
*Measured at (STC) Standard Test Conditions: 25°C, 1 kW/m2 insolation, AM 1.5
Dimensions (W x L x D) 32.5" x 62.0" x 1.8"/826 x 1575 x 46 mm
Weight (lbs/kg) 35.3 lbs / 16.0 kg
Cable Length (G) 43.3"/1100 mm
Output Interconnect Cable** 12 AWG with MC4 Locking Connector
Max Load 50 psf (2400 Pascals)
** A safety lock clip (Multi Contact part number PV-SSH4) may be required in readily accessible locations per NEC 2008 690.33 (C)
UL Listed UL 1703
Fire Rating Class C

Specification for Fronius IG Inverter:
Fronius IG Inverter
IG 4000
IG 5100
IG 4500-LV
DC Input Data
Recommend PV power 3000 - 5000 Wp 4000 - 6300 Wp 3600 - 5500 Wp
Max. DC input voltage 500 V 500 V 500 V
Operating DC voltage range150 - 450 V150 - 450 V 150 - 450 V
Max. usable DC input current 26.1A 33.2A 29.3A
AC Output Data

Max. Output power @ 40°C 4000 W 5100 W 4500 W
Nominal AC output voltage 240 V 240 V 208 V
Utility AC voltage range 212 - 264 V (240 V + 10% / -12%) 183 - 229V
Maximum AC current 16.7 A 21.3 A 21.6 A
Max. utility back feed current 0.0 A 0.0 A 0.0 A
Operating frequency range 59.3 - 60.5 Hz (60 Hz nom)
Total Harmonic Distortion THD <5%
Power Factor (cos phi) 1
General Data
Max. Efficiency 95.2% 95.2% 94.4%
Consumption in stand-by < 0.15 W (night)
Consumption during operation 15W
Enclosure NEMA 3R
Size (l x w x h) 28.4x 16.5 x 8.8 inches (720 x 418 x 223 mm)
Weight 42lbs (19 kg)
Ambient Temperature Range -5 to 122°F (-20 to +50 °C)
Cooling controlled forced ventilation
Integrated AC and DC disconnects standard UL approved DC & AC disconnects
Ground fault protection Internal GFDI, in accordance with UL 1741
DC reverse polarity Internal diode
Islanding protection Internal, in accordance with UL 1741, IEEE 1547
Over temperature Output power derating
Surge protection Internadl DC& AC protection to 6 kV
Safety UL 1741
EMI FCC Part 15; Class A & B
Anti-islandinig protection UL 1741, IEEE 1547
Ground fault detector and interruptor Compliant with NEC Art. 690 requirements, UL 1741
Max. AC over current protection Two-pole, 30 A circuit breaker
AC wire sizing Use maximum AWG 6 194 °F (90 °C) copper wire
DC wire sizing Use maximum AWG 8 194 °F (90 °C) copper wire
AC disconnect 32 A
DC disconnect 40A
Warranty 10 year Premium Warranty is standard

Important note for the 5250W Solar Grid Tie System - 30 Sharp 175W, IG5100 Fronius Inverter

Shipping Note: Due to the oversized nature of this product, freight is the only shipping method available. You may proceed with an order online and we will contact you prior shipping this item or please Contact Us and we will work to get you the exact shipping cost.
Note: Specifications and pricing of the 5250W Solar Grid Tie System - 30 Sharp 175W, IG5100 Fronius Inverter subject to change without notice. Illustrations and descriptions of the Sharp SHA-5250-IG5100 do not claim to be complete or exhaustive.
McAfee Secure sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
See Infinigi Reviews at Bizrate.com
Manufacturer Info
Share Product
Share via E-Mail 
 Share on Facebook Share on Twitter