2912W Solar Grid Tie System - 13 Sharp 224W, IG+3.0 Fronius Inverter
Image shows general items and are not an exact representation of items in the system

The 2912W Solar Grid Tie System - 13 Sharp 224W, IG+3.0 Fronius Inverter is no longer available from Infinigi.

Regrettably, we do not have any inventory left nor have access to this product as it is discontinued. Please note that we place this message on products that we have exhausted our options in obtaining. Contacting us will only reaffirm this message.

Thank you,
Infinigi Staff

2912W Solar Grid Tie System - 13 Sharp 224W, IG+3.0 Fronius Inverter

The Sharp 2912W Residential Solar Grid-Tie Systems (SGTS) provide reliable power for your home or business using top quality UL listed products. Each grid tie system is pre-packaged to save design time and includes solar modules, inverters, cables and all necessary hardware and electrical components. The Sharp 2912W residential / business solar grid-tie system is modular which means you can combine multiple units together or add to your system in the future.

The Sharp 2912W solar grid-tie system meet NEC code requirements and US safety standards. Complete installation guide and operational manual included.

Features of the 2912W Solar Grid Tie System - 13 Sharp 224W, IG+3.0 Fronius Inverter:

  • Solar Modules: 13 x 224W Sharp Modules. Solar modules are supplied equipped with "MC" or Tyco type interconnects.
  • Outdoor-rated Grid-Tie Inverter: IG+3.0 Fronius Inverter
  • Wiring:  Includes #10 AWG MC or TYCO interconnect extension sub-array cords, wire management system with cable ties andwire clips, PV copper groundinglug system, PV fused combiner (if needed) and array wiring pull boxes. The home-run wiring from the solar array to the main panel is supplied by the installer.
  • Documentation: Includes electrical drawings, data sheets, warranties, installation instructions and owner's manual.

Also Known As:
SHA 2912 IG+3.0

Specification for Sharp 224W Module:
Electrical Characteristics Sharp ND-224UC1
Maximum Power (Pmax)* 224 Watt
Tolerance of Pmax +10%/-5%
Type of Cell Polycrystalline silicon
Cell Configuration 60 in series
Open Circuit Voltage (Voc) 36.6 Volts
Maximum Power Voltage (Vpm) 29.3Volts
Short Circuit Current (Isc) 8.33 Amps
Maximum Power Current (Ipm) 7.66 Amps
Module Efficiency (%) 13.74 %
Maximum System (DC) Voltage 600 Volts
Series Fuse Rating 15 Amps
NOCT 47.5 C
Temperature Coefficient (Pmax) -0.485% C
Temperature Coefficient (Voc) -0.36% C
Temperature Coefficient (lsc) 0.053% C
*Measured at (STC) Standard Test Conditions 25C, 1 kW/m2 insolation, AM 1.5

Mechanical Characteristics
Dimensions 39.1" x 64.6" x 1.8" (994 x 1640 x 46 mm)
Cable Length 43.3" (1100 mm)
Output Interconnect Cable** 12 AWG with MC4 Locking Connector
Weight 44.1 lbs / 20.0 kg
Max Load 50 psf (2400 Pascals)
Operating Temperature (cell) -40 to 194F (-40 to 90C)
** A safety lock clip (Multi Contact part number PV-SSH4) may be required in readily accessible locations per NEC 2008 690.33 (C)

UL Listed UL 1703
Fire Rating Class C
Warranty 25-year limited warranty on power output
Contact Sharp for complete warranty information

Specification for Fronius IG Plus Inverter:
Fronius IG Plus3.0-1UNI
Recommended PV-Power (kWp) 2.5-3.45 3.2-4.40
MPPT-Voltage range 230 - 500 V 230 - 500 V
Max. Input voltage range
(at 1000 W/m" 14°F (-10°C) in open circuit operation)
600 V 600 V
Nominal Input Current 8.3A 10.5 A
Max. usable Input Current 14.0 A 17.8 A
Admissible conductor size (DC) No. 14-6 AWG

Output Data
Nominal output power (PAC nom) 3000 W 3800 W
Max. continupous output power
104°F (40°C) 208 V / 240 V /
277 V
3000 W 3800 W
Nominal AC output voltage 208 V / 240 V / 277 V

Operating AC voltage range (default)
208 V
240 V
277 V

183 - 229 V (-12 / +10 %)
211 - 264 V (-12 / +10 %)
244 - 305 V (-12 / +10 %)
Nominal output current
208 V
240 V
277 V

14.4 A
12.5 A
10.8 A

18.3 A
15.8 A
13.7 A
Max. output current
208 V
240 V
277 V

16.4 A
14.2 A
12.3 A

15.6 A
Admissible conductor size (AC) No. 14 - 4 AWG
Max. continuous utility back feed current 0 A
Nominal frequency 60 Hz
Operating frequency range 59.3 - 60.5 Hz
Total harmonic distortion < 3 %
Power factor 1

General Data
Max. Efficiency 96.2 %
CEC Efficiency
208 V
240 V
277 V

95.0 %
95.5 %
95.5 %

95.0 %
95.5 %
95.5 %
Consumption in standby (night) < 1 W
Consumption during operation 8 W
Cooling Controlled forced ventilation, variable fan speed
Enclosure Type NEMA 3R
Unit Dimensions (W x H x D) 17.1 x 24.8 x 9.6. in.
Inverter Weight 31 lbs. (14 kg)
Wiring Compartment Weight 24 lbs. (11 kg)
Admissing ambient operating temperature -13 ... 131°F (-25 ... + 55°C)
Compliance UL 1741-2005, IEEE1547-2003, IEEE 1547.1, ANSI/IEEE C62.41,
FCC Part 15 A&B, NEC Article 690, C22. 2 No. 107.1-01
(Sept. 2001)

Safety Equipment
Ground fault protextion Internal GFDI (Ground Fault Detector/Interrupter); in accordance with UL 1741-2005 and NEC Art. 690
DC reverse polarity protevtion Internal diode
Islanding protection Internal; in accordance with UL 1741-2005, IEEE 1547-2003 and NEC
Over temperature Output power derating / active cooling

Important note for the 2912W Solar Grid Tie System - 13 Sharp 224W, IG+3.0 Fronius Inverter

Shipping Note: Due to the oversized nature of this product, freight is the only shipping method available. You may proceed with an order online and we will contact you prior shipping this item or please Contact Us and we will work to get you the exact shipping cost.
Note: Specifications and pricing of the 2912W Solar Grid Tie System - 13 Sharp 224W, IG+3.0 Fronius Inverter subject to change without notice. Illustrations and descriptions of the Sharp SHA-2912-IG+3.0 do not claim to be complete or exhaustive.
McAfee Secure sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
PaypalVisaMastercardAmerican ExpressDiscover
See Infinigi Reviews at Bizrate.com
Manufacturer Info
Share Product
Share via E-Mail 
 Share on Facebook Share on Twitter