2070W Solar Grid Tie System - 9 Solon 230W, SB3000US SMA Inverter, and Mounts
Image shows general items and are not an exact representation of items in the system


The 2070W Solar Grid Tie System - 9 Solon 230W, SB3000US SMA Inverter, and Mounts is no longer available from Infinigi.

Regrettably, we do not have any inventory left nor have access to this product as it is discontinued. Please note that we place this message on products that we have exhausted our options in obtaining. Contacting us will only reaffirm this message.

Thank you,
Infinigi Staff


2070W Solar Grid Tie System - 9 Solon 230W, SB3000US SMA Inverter, and Mounts

The Solon 2070W Residential Solar Grid-Tie Systems (SGTS) provide reliable power for your home or business using top quality UL listed products. Each grid tie system is pre-packaged to save design time and includes solar modules, mounting systems, inverters, cables and all necessary hardware and electrical components. The Solon 2070W residential / business solar grid-tie system is modular which means you can combine multiple units together or add to your system in the future.

The Solon 2070W solar grid-tie system meet NEC code requirements and US safety standards. The mounts securely attach the array to the roof in compliance with US Building Codes. Complete installation guide and operational manual included.

Features of the 2070W Solar Grid Tie System - 9 Solon 230W, SB3000US SMA Inverter, and Mounts:

  • Solar Modules: 9 x 230W Solon Modules. Solar modules are supplied equipped with "MC" or Tyco type interconnects.
  • UniRac SolarMount Mounting System: Code-compliant, flush PV mounting structure of clear anodized aluminum including rail set with L—feet and attachments for tile roofs, top-clampsand splice kits. Adjustable tilt leg sets for mounting to horizontal surfaces are sold separately.
  • Outdoor-rated Grid-Tie Inverter: SB3000US SMA Inverter
  • Wiring:  Includes #10 AWG MC or TYCO interconnect extension sub-array cords, wire management system with cable ties andwire clips, PV copper groundinglug system, PV fused combiner (if needed) and array wiring pull boxes. The home-run wiring from the solar array to the main panel is supplied by the installer.
  • Documentation: Includes electrical drawings, data sheets, warranties, installation instructions and owner's manual.

Also Known As:
SOL.2070.SB3000US.M
SOL 2070 SB3000US M
SOL_2070_SB3000US_M
SOL2070SB3000USM

Specification for Solon 230W Module:
Mechanical specificationsSolon Blue P220/6+/01 230WP
Length 1,660 mm
Width 990 mm
Height 42 mm
Weight 26 kg
Junction box diodes A SOLON junction box with bypass
Cable Solar cable, length 900 mm, 4 mm2, prefabricated with MC plug
Front glass White toughened safety glass, 4 mm
Cells 60 pc. polycrystalline Si 6.2" (156 x 156 mm)
Cell encapsulation EVA (Ethylene-Vinyl-Acetate)
Back Tedlar composite film
Frame Anodised aluminium profile
Dimensions of the frameless module 1,633 x 993 x 5 mm (L x W x H)

Electrical specifications (typical)
?Module class Pmax (± 3 %): 235 Wp 230 Wp 225 Wp 220 Wp 215 Wp 210 Wp 205 Wp 200 Wp
Rated voltage Umpp: 29,2 V 29,0 V 28,9 V 28,8 V 28,5 V 28,3 V 28,1 V 27,8 V
Rated current Impp: 8,05 A 7,95 A 7,80 A 7,65 A 7,55 A 7,45 A 7,30 A 7,20 A
Open circuit voltage Uoc: 36,9 V 36,7 V 36,6 V 36,4 V 36,3 V 36,1 V 35,9 V 35,6 V
Short circuit current Isc: 8,65 V 8,55 V 8,40 V 8,30 V 8,20 V 8,10 V 8,00 V 7,90 V
Maximum system voltage: 860 V 860 V 860 V 860 V 860 V 860 V 860 V 860 V
Module efficiency: 14,30 % 14,00 % 13,69 % 13,39 % 13,08 % 12,78 % 12,47 % 12,17 %

Operating conditions
Temperature range - 40 °C to + 85 °C
Hail maximum diameter of 28 mm with impact speed of 86 km/h
Maximum surface load capacity tested up to 5,400 Pa according to IEC 61215 (advanced test)

Specification for SMA Inverter:
Specification for SMA Sunny Boy Inverter Sunny Boy 3000-US Sunny Boy 4000-US
  208 V AC
240 V AC
208 V AC
240 V AC

Input (DC)
Max. recommended PV power (@ module STC) 3750 W 4375 W 5000 W
Max. DC power (@ cos ? = 1) 3200 W 4200 W
Max. DC voltage 500 V 600 V
DC nominal voltage 250 V 310 V
MPP voltage range 175 — 400 V2
200 — 400 V
220 — 480 V
250 — 480 V
Min. DC voltage / start voltage 175 / 228 V
200 / 228 V
220 / 285 V
250 / 285 V
Max. input current / per string (at DC disconnect) 17 A / 17 A 36 A
@ combined terminal
18 A / 18 A 36 A
@ combined terminal

Output (AC)
AC nominal power 3000 W 3500 W 4000 W
Max. AC apparent power 3000 VA 3500 VA 4000 VA
Nominal AC voltage / adjustable 208 V / yes 240 V / yes 208 V / yes 240 V / yes
AC voltage range 183 — 229 V
211 — 264 V
183 — 229 V
211 — 264 V
AC grid frequency; range 60 Hz; 59.3 — 60.5 Hz 60 Hz; 59.3 — 60.5 Hz
Max. output current 15 A 13 A 17 A
Power factor (cos ?) 1 1
Phase conductors / connection phases 1 / 2 1 / 2
Harmonics < 4% < 4%
Efficiency    
Max. efficiency 96%
96.5%
96.5%
96.8%
CEC efficiency 95%
95.5%
95.5%
96.0%
Protection devices    
DC reverse-polarity protection yes yes
AC short circuit protection yes yes
Galvanically isolated / all-pole sensitive monitoring unit yes / - yes / -
Protection class / overvoltage category I / III I / III

General Data
Dimensions (W / H / D) in mm (in) 450 / 350 / 235 (18 / 14 / 9) 450 / 350 / 235 (18 / 14 / 9)
DC Disconnect dimensions (W / H / D) in mm (in) 187 / 297 / 190 (7 / 12 / 7.5) 187 / 297 / 190 (7 / 12 / 7.5)
Packing dimensions (W / H / D) in mm (in) 390 / 580 / 470 (15 / 23 / 18.5) 390 / 580 / 470 (15 / 23 / 18.5)
DC Disconnect packing dimensions (W / H / D) in mm (in) 370 / 240 / 280 (15 / 9 / 11) 370 / 240 / 280 (15 / 9 / 11)
Weight / DC Disconnect weight 38 kg (84 lb) / 3.5 kg (8 lb) 38 kg (84 lb) / 3.5 kg (8 lb)
Packing weight / DC Disconnect packing weight 44 kg (97 lb) / 4 kg (9 lb) 44 kg (97 lb) / 4 kg (9 lb)
Operating temperature range (full power) —25 °C ... +45 °C
(—13 °F ... +113 °F)
—25 °C ... +45 °C
(—13 °F ... +113 °F)
Noise emission (typical) 40 dB(A) 37 dB(A)
Internal consumption at night 0.1 W 0.1 W
Topology LF transformer LF transformer
Cooling concept OptiCool OptiCool
Electronics protection rating / connection area NEMA 3R / NEMA 3R NEMA 3R / NEMA 3R

Features
Display: text line / graphic yes / - yes / -
Interfaces: RS485 / Bluetooth opt. / opt. opt. / opt.
Warranty: 10 / 15 / 20 years yes / opt. / opt. yes / opt. / opt.
Certificates and permits (more available on request) UL1741, UL1998, IEEE 1547, FCC Part 15 (Class A & B), CSA C22.2 No. 107.1-2001 UL1741, UL1998, IEEE 1547, FCC Part 15 (Class A & B), CSA C22.2 No. 107.1-2001
Data at nominal conditions    
Type designation SB 3000US SB 4000US

Important note for the 2070W Solar Grid Tie System - 9 Solon 230W, SB3000US SMA Inverter, and Mounts

Shipping Note: Due to the oversized nature of this product, freight is the only shipping method available. You may proceed with an order online and we will contact you prior shipping this item or please Contact Us and we will work to get you the exact shipping cost.
Note: Specifications and pricing of the 2070W Solar Grid Tie System - 9 Solon 230W, SB3000US SMA Inverter, and Mounts subject to change without notice. Illustrations and descriptions of the Solon SOL-2070-SB3000US-M do not claim to be complete or exhaustive.
Verified
PaypalVisaMastercardAmerican ExpressDiscover
Manufacturer Info
Solon
Share Product
Share via E-Mail 
 Share on Facebook Share on Twitter